VHF/UHF DIGITAL Mobil- Transceiver


595,00 EUR

Product.Nr. ID-5100E


2m / 70cm  VHF / UHF  DUALBAND - Digital + Analog Transceiver 

Innovation Innovation and Mobility Taken to the Next Level

Intuitive Touch Screen Operation 
The intuitive touch screen interface provides quick and smooth operation. The large 5.5 inch display (320×128 pixels) responds naturally to the touch allowing you to change settings, enter frequencies, edit memory channels with ease.

Vehicle installation example
(Using optional MBF-1 mount base and MBA-2 controller bracket)

Qwerty keyboard example

DV/DV Dualwatch 
The ID-5100E can receive both FM/FM and FM/DV mode signals simultaneously. Two DV mode signals can be monitored for receive
on either channel. You can check other repeaters or other channel activities while waiting for the main repeater.
 * Main band audio has priority, if two DV signals come in at the same time.

DV / DV  Dualwatsch                                                  FM / DV  Dualwatsch

FM / DV  Dualwatsch

Integrated GPS Receiver 
The ID-5100E has an integrated GPS receiver in the controller and shows own position, course, speed and altitude on the display.
The GPS position information can be used for exchanging position reports, tracing the GPS log and searching for nearby repeater sites.

Received position information example

DV/FM Repeater List Function 
The DV/FM repeater list function assists you in accessing nearby repeaters, even when you are visiting an area for the first time.
The function searches for a nearby repeater using the repeater memories and GPS position information.
 * To use the automatic repeater list function, the position data of the repeater is required. The ID-5100E will be shipped with a limited number of repeater memories preprogrammed.

Dplus Reflector Linking
Dplus reflector link commands are added to the DR function to allow easy reflector operation. Use Reflector, link/unlink to Reflector, echo test and repeater information commands are selectable.

Reflector commands example

SD Card Slot for Voice and Data Storage
When used with an SD card, the SD card can store various contents including voice memory, DV auto reply message, TX voice message, QSO log, RX history log and GPS log data. Memory channels, repeater memories and other personal settings can be
saved to the SD card and can be loaded to the transceiver.

VS-3 Bluetooth® Headset
The optional Bluetooth® headset, VS-3 provides hands-free communication and can remotely control the ID-5100E with three programmable buttons.
 * Optional UT-133 Bluetooth® unit must be installed in the ID-5100E.

Bluetooth® application image

Bluetooth® headset, VS-3 (option)                           Bluetooth® unit, UT-133 (option)

RS-MS1A Android™ Application
(Free download application from Google Play™)
The RS-MS1A allows you wirelessly connect the ID-5100E and remotely set DR functions, link with a map application and send/receive messages over the DV mode. In addition, pictures taken by the Android™ device can be transmitted over the DV mode.
DR function setting example        ©2014 Google - Map data ©2014 Google Repeater map example

 * Either optional UT-133 Bluetooth®unit or OPC-2350LU Data cable is required.
 * Some functions may not work properly, depending on Android™ phones and devices used.

          Free download application from Google Play™

DV Fast Data Mode*
By using data in place of voice frames, the ID-5100E can transfer data 3.5 times faster (3480 bps) than in the conventional DV mode (with voice).
 * The DV Fast Data mode is not compatible with the DV mode low-speed data communication.

Other Funktions
• Enhanced D-PRS functions with object, position, items and weather formats
• Convenient memory contents management using CSV format
• Speech function announces operating frequency, mode and received callsign (DV mode)
• Independent main dial, volume and SQL knobs for A/B bands
• AM airband dualwatch
• CS-5100, cloning software supplied
• 50W output power on both VHF and UHF bands

Supplied accessories (* May differ, depending on version) 
• Hand microphone, HM-207
• DC power cable, OPC-1132
• Controller cable, OPC-837 (3.5 m; 11.4 ft)
• Microphone hanger
• CD (CS-5100 and instruction handbook PDF)
• Spare fuse

Main unit panel view

Front panel

Rear panel

The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Icom Inc.
is under license.